26" - model FS-P2603D

FSN Medical Technologies has solutions for managing your operating room video signals. Our products are engineered and built for compatibility with other highly specialized surgical and diagnostic equipment used in surgical suites, operating rooms, emergency rooms, and procedural facilities.

FS-P2603D, our 26” medical display, is uniquely equipped to handle tasks in the demanding OR environment.

Features
Specification
Download

LED backlight
Dual DVI in/out
Rapid signal detection, robust mode tables
Artifact-free HD images
Fanless - sterile field compatible
Built to last, rugged aluminum housing
Calibrated to clinical color
Image pan, zoom, freeze, picture-in-picture

General Features

Item	Description
Panel	26 inch TFT LCD (IPS)
Resolution	1920 x 1080 (HD 1080)
Input Signal	2 x DVI-D 2 x SD/HD/3G-SDI (BNC) 2 x SOG 1 x VGA (D-sub) 1 x C-Video (BNC) 1 x S-Video (DIN) 1 x Component (RGBS, YPbPr) (5 x BNC)
Touch (Optional)	(Note: Depth and Weight will increase)
GPIO Port	SWAP, PIP / PBP1 / PBP2 Select, Record Indicator
Output Signal	2 x DVI-D, 2 x SD/HD/3G-SDI (BNC), 2 x SOG, 1 x C-Video (BNC), 1 x S-Video (DIN), 1 x Component (RGBS, YPbPr) (5 x BNC)
Power Supply	AC / CD Adapter (AC 100~240V, DC 24V 6.25A)
Control Key	Power, Menu, PIP, Up, Down, Plus, Minus, Input
Unit Dimension	668 (W) X 421 (H) X 88.8 (D) mm 26.3 (W) X 16.57 (H) X 3.5 (D) inch
Average Brightness	450
Response Time (G-to-G)	8 ms (avg.)
Viewing Angle (CR>10)	R/L 178, U/D 178
Weight	8.2 kg, 18 lbs
Contrast Ratio	1400:1 Typical
Pixel Pitch	0.3 X 0.3

Output Signal		Type	Description
DVI		Type	Digital RGB
		Signal Format	TMDS single link
		Connector	DVI-D
CVBS		Type	C-Video
		Color system	NTSC, PAL
		Signal Format	Composite Video Signal
SVHS Y/C		Type	NTSC, PAL
		Color system	NTSC, PAL
		Signal Format	Y/C Separated Video Signal
SDI
		SMPTE-425M	1080p (60 / 59.94 / 50)
		SMPTE-274M	1080i (60 / 59.94 / 50)
		SMPTE-274M	1080p (30 / 29.97 / 25 / 24 / 24sF / 23.98 / 23.98sF)
		SMPTE-296M	720p (60 / 59.94 / 50)
		SMPTE-260M	1035i (60 / 59.94)
		SMPTE-125M	480i (59.94)
		ITU-R-BT.656	576i (50)
Component	Video	Type	Analog Y/G, Pb/B, Pr/R
		Connector	BNC
		Level	0.7Vp-p ±5%
		Polarity	Positive
		Impedance	75 ohm ±5%
		Horizontal Frequency	30 ~ 93KHz
		Vertical Frequency	50 ~ 85Hz
		Applicable Maximum Pixel Frequency	170MHz
		Maximum resolution	1920x1080 / 60Hz (148.5MHz Timing, NON-CRT)
	Sync	Type	H/CS,VS
		Level	TTL Level (V high ≥2.0V, V low ≤0.8V)
		Polarity	Positive or Negative
		Connector	BNC
SOG		Type	Sync on green
		Input Signal Level	1.0Vp-p ( Video :0.7Vp-p / Sync : 0.3Vp-p)
		Impedance	75 ohm ±5%
		Input Signal Frequency	MAX. 162MHz

Signal Timing

Input Signal		Type	Description
VGA	Video	Type	Analog RGB
		Connector	DSUB-15
		Level	0.7Vp-p ±5%
		Polarity	Positive
		Impedance	75 ohm ±5%
		Horizontal Frequency	30 ~ 93Khz
		Vertical Frequency	50 ~ 85 Khz
		Applicable Maximum Pixel Frequency	170 MHz
		Maximum resolution	1920x1200 / 60Hz (154MHz Timing, NON-CRT)
	Sync	Type	Separate H/V sync, Composite h/v sync, Sync on Green Automatic synchronization without external switch
		Level	TTL Level (V high ≥2.0V, V low ≤0.8V)
		Polarity	Positive or Negative
		Range	Automatic synchronization for applicable resolution modes which follows industrial standard within frequency range of 30 to 93KHz in horizontal and 50 to 85Hz in vertical
		Terminal Resistance	more than 2 KΩ
DVI		Type	Digital RGB
		Signal Format	TMDS Single Link
		Connector	DVI-D
Optical DVI		Type	Digital RGB
Optical DVI		Signal Format	Fiber Optic Transmission
CVBS		Type	C-Video
		Color System	NTSC, PAL
		Signal Format	Composite Video Signal
SVHS Y/C		Type	S-Video
		Color System	NTSC, PAL
		Signal Format	Y/C Separated Video Signal
SDI
		SMPTE-425M	1080p (60 / 59.94 / 50)
		SMPTE-274M	1080i (60 / 59.94 / 50)
		SMPTE-274M	1080p (30 / 29.97 / 25 / 24 / 24sF / 23.98 / 23.98sF)
		SMPTE-296M	720p (60 / 59.94 / 50)
		SMPTE-260M	1035i (60 / 59.94)
		SMPTE-125M	480i (59.94)
		ITU-R-BT.656	576i (50)
Component	Video	Type	Analog Y/G, Pb/B, Pr/R
		Connector	BNC
		Level	0.7Vp-p ±5%
		Polarity	Positive
		Impedance	75 ohm ±5%
		Horizontal Frequency	30 ~ 93KHz
		Vertical Frequency	50 ~ 85Hz
		Applicable Maximum Pixel Frequency	170MHz
		Maximum resolution	1920x1080 / 60Hz (148.5MHz Timing, NON-CRT)
	Sync	Type	H/CS,VS
		Level	TTL Level (V high ≥2.0V, V low ≤0.8V)
		Polarity	Positive or Negative
		Connector	BNC
SOG		Type	Sync on green
		Input Signal Level	1.0Vp-p ( Video :0.7Vp-p / Sync : 0.3Vp-p)
		Impedance	75 ohm ±5%
		Input Signal Frequency	MAX. 162MHz

Item	Type	Size
FS-P2603D Data Sheet	PDF	810 KB

TOP